Packs/Racks/Baskets

Salsa's EXP Series Anything Cradle system is designed to create carrying capacity in front of your handlebars, while providing ample room for cables without fear of kinking them. This system is available as a complete "kit", or sold individually for custom set-ups. - Anything Cradle Straps are the perfect width for the Anything Cradle - Can also be used to strap stuff down on racks or wherever else is needed - They cinch tight but easily release tension with a push of the buckle - Extremely versatile - 25mm nylon webbing, Duraflex hardware

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures, this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 24 kids bikes

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

The Mountain Feedbag is an on-the-go aid station for endurance riding. It offers ample food storage with fumble-free, one-handed access via an innovative drawcord system. Slightly larger than the previous version, you can now easily fit your beloved 1L Nalgene bottle, camera lenses, and more. It also features an additional outside pocket, leaving you with more space for wrappers, sunscreen, granola bars, and other small items. Mountain Feedbags also work well as bike-mounted lens cases for mirrorless camera systems. Features: - Super-fast, one-handed (really!) opening and closure with no fumbling to grab cord locks - Three external pockets for gels and trash - Three-layer construction: outer fabric, foam, and liner. Foam adds stiffness and insulates. - Bright yellow interior liner snaps in place and is easily flipped for cleaning - Mounts to either side of stem with adjustable attachment points - run two for tons of storage - Easily used in combination with a Sweetroll or Harness handlebar system - Fits bike water bottles, Nalgene bottles, and bear spray cans - Weight: 3.7oz - Materials: Revelate exclusive VX 21 polyurethane coated X-pac; 420 denier yellow lining - Made in the USA with domestic and imported materials

The mega-gear-haulin' Ripio Frame Bag will carry all the junk you could ever need inside the confines of your road, gravel or touring bike frame (it might even fit your open frame mountain bike, you'll just have measure). Durable stretchy Cordura supports the zippers so you can jam in all the snacks and still zip the bag closed. Thanks to a two-storied system with an extra map pocket on the side, interior coin pockets, optional internal loops and Velcro straps, there is no more unpacking the entire bag for that one little multitool lost at the bottom. As with all Revelate gear, the Ripio is built to withstand whatever you throw at it, so pack it up for your trip to South America, the Continental Divide Trail, or wherever you are going—it's up for the assignment. - Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag - X-Pac panels that are two times as abrasion resistant as standard VX material - Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers that organizes small items - Lower zippered compartment with horizontal divider that opens to create one large compartment - Additional vertical divider in top section of LG & XL sizes to avoid leg interference - Urethane coated webbing for easy cleaning, movable Velcro one-wrap attachments for frame fitting - Front top tube attachments accommodate top tube packs - Made in the USA with domestic and imported materials Weight: SM: 8 oz / 227 g MD: 14 oz / 397 g LG: 16 oz / 454 g XL: 18.5 oz / 425 g Volume: SM: 305 in³ / 5 L MD: 385 in³ / 6.3 L LG: 470 in³ / 7.7 L XL: 550 in³ / 9 L Materials: Dimension Polyant VX-21 with abrasion resistant finish; TPU laminated stretch woven Cordura; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining with full perimeter foam padded tube sections.

The Shrew is our smallest seat bag yet! Updated for 2021 to include a rear stabilization strap. The Shrew is built for big day rides on any terrain: gravel, singletrack, road, snow, whatever. The Shrew carries spare clothing and gear for the long haul with ease. It packs a mighty 2.25L capacity and weighs just 5 ounces. Mounting only to the saddle rails gives the Shrew maximum versatility and a near universal fit to any bike. Compatible with any seat post—dropper, suspension, aero, or high setback seat posts are no problem, the Shrew fits them all! Scaled down from our larger seat bags, the shrew features independent rail straps with added hypalon wings that wrap the upper saddle rails. The attachment straps connect to a fiberglass stay stiffening the bottom of the bag for compression. This system gives the bag great stability in a small package. A roll top opening provides fast and simple access to your gear. FEATURES - Roll down closure allows bag to expand or compress in volume - Revelate exclusive RevX-PAC panels that are two-times as abrasion resistant as standard VX material. - Indie-Rail attachment system provides maximum stability without added hardware. - Fiberglass stay - Carbon seatpost friendly - Made in the USA with domestic and imported materials SPECIFICATIONS - Weight: 5 oz / 142 g - Volume: 137 in³ / 2.25 L - Materials: Dimension Polyant VX-21 with abrasion resistant finish.

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

The Legendary Tangle frame bag is the original half frame bag, it offers substantial cargo capacity in a sleek, rectangular shape that fills unused space on your bike. Designed to fit a variety of bike frames, these bags can be used for everyday riding, commuting, and adventuring. Stash your food, tools, and a mini pump and you're ready to go anywhere. Features: - Zipstretch construction - Pairs a bomber, wetsuit style molded-tooth zipper with Revelate's exclusive stretch Cordura panels that reduce zipper stress when closing bag - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers organizes small items - Urethane-coated webbing attachments won't absorb water or grit - Daisy chain front top tube attachment accommodates any top tube bag configuration - Padded with closed cell foam along all tube sections - Internal pump straps along top tube - Low-profile cam-lock buckles - Made in the USA with domestic and imported materials Sizing: - Small: top length 17.5", overall height 4" - Medium: top length 19.75", overall height 4.5" - Large: top length 21", overall height 6.5" To check that the Tangle leaves room for water bottle mounts, measure the vertical height from the bottle top to the bike’s top tube and compare to the the listed bag height. A little bit of overlap is ok, side-entrance water bottle cages are preferable. Specifications: - Materials: VX21 X-pac, 1050-denier domestic ballistics nylon, 420-denier diamond ripstop lining, closed cell foam padded tube sections

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

The 1/2 Pack™ is a partial frame bag that allows for gear storage within your triangle while still leaving room to run water bottles/cages. Available in four sizes, the 1/2 Pack™ fits a multitude of open frame designs and is a great bag for longer day rides and overnight adventures alike. FEATURES -Full zip main compartment (drive side) -Half zip tool pocket (non-drive side) -Hook & loop closure hydration/wire port -Adjustable/removable Velcro® One-Wrap® top tube straps allow for a more customized fit -YKK® Uretek zippers -X-pac® VX21/VX42 face fabrics -Cordura® abrasion resistant fabric along tubing -MIL-SPEC webbing and binding -High Density closed-cell foam padding along down tube -Reflective Oveja Negra logo -WEIGHT: Small: 6.5 oz. Medium: 7.0 oz. Large: 7.5 oz . XL: 8.0 oz. -CAPACITY: Small: 3L Medium: 3+L Large: 4L XL: 4+L -Made in Salida, Colorado of domestic and imported materials

ABOUT Inheriting its name from the corner store, the Bodega full frame bags are the junk drawer for all of your bikepacking essentials and can fit provisions for an all day, overnight, or month long ride. Stash burritos, beverages, bags of ramen, and anything else you find fit to carry in our highest volume frame bag. FEATURES/SPECS Fully adjustable/removable top tube strap design allows for the addition of top tube bags without conflicting strap placement Hydration/wiring exit garage on main compartment zipper Heavy Duty #10 YKK Uretek zippers X-pac® VX21/VX42 fabrics Mil-Spec Cordura® abrasion resistant fabric along tubing Small and Medium - Single main compartment (drive side), full length map/flat pocket (non-drive side) Large and XL - Double compartment (drive side) with trap door divider, full length map/flat pocket (non-drive side) WEIGHT Small: 9.6 Medium: 11.1 Large: 14.1 XL: 16.6 CAPACITY Small: 5L Medium: 6L Large: 7L XL: 8L MADE IN THE U.S.A.

An impeccably designed handlebar bag that is aptly named for its versatility and "anything goes" inspiration, no one regrets adding the Chuckbucket to their adventure setup. Designed around a liter Nalgene bottle for bikepacking, long days, a commute, or a rowdy ride, this bag easily holds a large bottle from any manufacturer, snacks, layers, tools or anything you want to chuck in there. Items stay securely inside the Chuckbucket with an elastic cover synch on top. A mesh pocket on the side with a Velcro closure is a nice detail that holds a phone, chapstick, or your melted chocolatey candy bar wrappers. We here at University Bicycles have field tested nearly the entire Oveja Negra product line and we love every piece of gear that this small Colorado company produces. FEATURES -Designed to fit a 1L Nalgene® or 40 oz. Klean Kanteen® -Structured bucket top keeps bag open for easy access -One handed opening/closing -Removable Fork-crown strap for ultimate adaptability -Attaches at either side of stem or run one on both sides at the same time -Hook & loop closure mesh pocket keeps items secure -Drain hole for leaky water bottles or rainy days -High density closed cell foam keeps your items protected -X-pac® VX21 and Cordura® construction, 70d hex ripstop top -Lime green liner fabric so you can see what is down there -Velcro® One Wrap® attachment straps -WEIGHT: 4 oz. -CAPACITY: 1L+ -Made in Salida Colorado of domestic and imported materials

Like its namesake (trucker lingo for a speeding big rig) the Gearjammer™ helps haul all the necessary items for overnight bikepacking trips and randonneur adventures alike. Lightweight, waterproof materials and bomb-proof construction create a light yet durable pack with all the features needed to securely store gear from your seat post. The Gearjammer™ seat bag has stiffened side panels and a plastic frame sheet that keep the pack stable and positioned away from your legs. This bag will not wag; the Gearjammer™ is one of the most stable seat bags on the market. FEATURES/SPECS Roll-Top design allows for variable volume packing Exterior compression straps (x2 sides, x1 top/bottom) for unparalleled compression and load stabilization HDPE frame sheet retains the shape of the pack and distributes the load Bomb-Proof 2" die-cut and welded hook & loop seat post attachment strap Gear Loops on underside of pack offer increased carrying capacity Superfabric® Grip™ provides a durable and highly stable contact point along the seat post Nexus® cam-locking buckles secure the bag to your seat rails High density foam stiffened side panel keeps the load tucked away from your legs 1050 Ballistic Nylon seat rail attachment point and wear patch X-Pac® VX21/VX42 fabrics MIL-SPEC webbing/binding WEIGHT Medium: 12.2 oz. Large: 12.6 oz. CAPACITY Medium: 4-10 liters Large 6-12 liters MADE IN THE U.S.A. of domestic and imported materials

Top tube bags are an essential part of any bikepacking setup but are also widely employed for long days in the saddle, endurance racing, and even around town. The Snack Pack™ has been around since the start and is one of our most popular bags, and for a good reason. We've streamlined this little pack to be ultra stable and provide intuitive, one-handed access while in the saddle. Adjustable Velcro® One-Wrap® straps allow you to dial in the Snack Pack™ for a perfect, snug fit. FEATURES -Large and XL designed to fit at stem/steer tube -Overly stable design -Easy, one-handed access -Fully padded along tubing -Adjustable Velcro® One-Wrap® straps -Plastic side inserts give bag structure -YKK® Uretek zippers -X-Pac® VX21 fabric -Cordura® abrasion resistant fabric at tubing -WEIGHT: L: 3.7 oz. XL: 4.2 oz. -CAPACITY: L: 5+ candy bars XL: 8+ candy bars -Made in Salida, Colorado of domestic and imported materials

Let's face it, not every ride happens the way we want it to. Your bike can break, the weather can change, and the trail may not be as well-marked as you'd like it to be. The Raptor 10 is specifically designed with these challenges in mind. A premium pack that carries it all without weighing you down, the Raptor features winged shoulder straps that contour to the shape you're in when you reach for your handlebars—delivering superior stability even when the trail turns super techy. AirScape suspension evenly distributes your load while permitting dynamic range of motion, and a mesh-covered foam backpanel leaves you well ventilated. An included 2.5-liter reservoir slides into its own dedicated compartment for fill-up simplicity, and another devoted space at the base of the pack houses a Tool Roll for your mini-pump, tire lever, hex keys, and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

Quality trumps quantity, and with the Savu 2 less can certainly be more. Reach for this single-bottle lumbar pack for quick laps on your favorite trails. Offering enough storage capacity for ride essentials, such as a spare tube, CO2, multi-tool and snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Bottle Carry The perfect solution for stable lumbar carry allows you to access your bottle(s) with ease. For short rides without water, the bottle pockets compress to maintain stability and keep the pack close to your body. Water bottles not included. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Easy-access angled padded bottle sleeve - Easily accessible split zippered side compartments with internal tool organization - Blinker light attachment with reflective graphic - Extra thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

The perfect pack for the mountain biking minimalist, the Savu 5 lumbar pack is ideal for quick laps on local singletrack or gravel trails. Two rigid pockets make it easy to pull and replace water bottles as you pedal, while angled hipbelt and compression straps keep the pack close to your body and provide max stability over every trail. (No creep-around here.) Not a two water bottle kind of ride? No problem. Each water bottle sleeve can tuck away when not needed to provide a streamlined pack. Any way you customize it, the main compartment and side hipbelt pockets fit vital flat-fixing tools, a tube, snacks and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Bottle Carry The perfect solution for stable lumbar carry allows you to access your bottle(s) with ease. For short rides without water, the bottle pockets compress to maintain stability and keep the pack close to your body. Water bottles not included. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Dual snap-in-place or tuck-away water bottle sleeves - Easily accessible split zippered side compartments with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Easily accessible sunglasses/phone pocket - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

For all Sport-Rollers, Front-Rollers and Sport-Packers with the QL1 system Is the bracket on your bike pannier with the QL1 mounting system broken? Simply replace the bracket to get your faithful pannier back in action. - Length 23cm - Hole spacing 7,5 - 6,5 - 7,5cm