Rear

More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately

Gravel throws just about everything at your bike, and the RED XPLR AXS rear derailleur will happily take it all. Bring on the sticks, stones, and airport baggage abuse because the Full Mount derailleur design fits onto frames with the hangerless interface to make for the most robust and reliable gravel drivetrain possible. No adjustment screws mean the setup is simpler than ever. And a surprise stick is no match for the Magic Wheel, as the debris-resistant lower pulley keeps the chain moving at all times. Purpose-built for gravel, this 1x-specific unit prioritizes shift precision and chain management no matter the terrain or conditions. FEATURES - 1x specific for use with 10-46T XPLR 13-speed cassette and road Flattop chains - The Hangerless Interface and Full Mount attachment allow for the most precise shifting and the ultimate resistance to impact - Requires frame with UDH interface - Simple setup with no adjustment screws - Superior chain management with MTB-inspired spring clutch - Replaceable and rebuildable parts - Magic Wheel keeps the chain moving, even if debris enters the lower pulley - Compatible with existing AXS batteries

The heart of the AXS ecosystem is lighter, more efficient, and more capable than ever. Covering cassette ranges from 10-28t up to 10-36t, this wireless wonder has larger pulleys to decrease chain articulation and increase efficiency, and an Orbit fluid damper to keep everything in place over the rough stuff. One derailleur ready for 1x or 2x, on road or off. - Orbit chain management technology keeps the drivetrain quiet and secure - AXS enabled for easy setup, personalization, and reliability - 16g lighter than previous generation - Compatible with both 1x and 2x RED drivetrains - Compatible with cassettes from 10-28t to 10-36t - Larger X-Sync pulleys for increased efficiency - Compatible with existing AXS batteries (sold separately) Effortless Performance. Effortless Perfection You want your performance to represent 100% of what you put in, and SRAM designed RED AXS with that goal. RED AXS is not just the SRAM’s lightest electronic groupset ever, it has more comfortable and lower-effort braking, more precise shifting, and expanded gearing choices. Riding isn’t effortless SRAM RED is. Heart of the AXS Ecosystem The RED derailleur is now lighter, more efficient, and more capable than ever. Covering cassette ranges from 10-28T up to 10-36T, this wireless wonder has larger pulleys to decrease chain articulation and increase efficiency, and an Orbit fluid damper to keep everything in place over the rough stuff. One derailleur ready for 1x or 2x, on road or off.

The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately

The XX SL Eagle T-Type AXS™ 12-Speed rear derailleur foundationally changes the relationship between cassette and derailleur. Engineered as integrated, interdependent transmission components, the T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. Its game-changing Full Mount attachment method creates a far stronger connection and grips both sides of the frame. This XX SL T-Type rear derailleur features the same intuitive pairing and set-up procedure as Eagle AXS™ derailleurs. - Features an overload clutch and a tucked-in profile, removing all but what’s needed - Accommodates common maintenance and to further its race-day performance, comes with a lower pulley called "Magic Wheel" that keeps spinning if an object becomes lodged - Features a carbon cage, a replaceable outer link and b-knuckle cover for lightweight and easy maintenence - Battery Not Included

The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

Whether on the starting line or not, the X0 Eagle T-Type 12-Speed rear derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. This foundationally changes the entire relationship between cassette and derailleur. Beyond that, its Full Mount attachment method creates a far stronger connection that grips both sides of the frame. These X0 T-Type rear derailleur features the same intuitive pairing and set-up procedure as our Eagle AXS™ derailleurs - Competition proven strength and reliability - X0 Eagle derailleur is especially robust, allowing for common maintenance that serious riders demand - Features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable - Aluminum cage - Battery Not Included

K-Force WE is a high-tech electronic groupset with an elegant design. A unique product that will make you change the way you ride your bike. Long battery life, different size levers, and wireless technology at the shifters for smooth, quiet and precise shifting. - K-Force WE 11-speed system - Shifter Compatibility - K-Force WE - Cassette Compatibility - K-Force WE - Energy-saving composite pulleys

Full Mount resilience. No bent hangers after impacts or travel. No adjustment screws. Just fast, precise shifting constructed for gravel. The 1x-specific Force XPLR AXS rear derailleur provides incredible chain management, and the straight parallelogram design means there’s no debris or conditions that can put this derailleur into the rear wheel. This 1x-specific unit is strong and made to endure it all. Features - 1x specific for use with 10-46T XPLR 13-speed cassette and Flattop chains - Hangerless Interface and Full Mount attachment allow for the most precise shifting and the ultimate resistance to impact - Simple setup with no adjustment screws - Replaceable and rebuildable parts

Shimano's GRX RX825 Di2 12-speed rear derailleur features a built-in wireless connectivity unit and charging port, ensuring fast and reliable shifting for mixed-terrain riding and easy recharging. Integrated Shadow RD+ technology prevents chain slap and ensures precise shifting even on rough terrain. Thanks to built-in ON/OFF switch, wheel removal is easy too. The RD-RX825 is compatible with 11-34t and 11-36t 12-speed cassettes and supports Full or Semi-Synchronized shift modes, enhancing rider customization. - Integrated wireless unit, charging port, and switch allows a compact design - Offers fast and reliable shifting on rough terrain - Adjustable chain stabilizer prevents chain slap - Shimano Shadow RD+ offers a quiter drivetrain by utilizes a stablizer to reduce chain slap and provides a simple solution for chain drops - Gravel-tuned clutch tension features a switch stabilizer ON/OFF to match terrain - ON for gravel, OFF for smooth roads - LED status indicator to easier identify battery life, pairing, adjust mode, etc. - Top sprocket: Max. 11t/Min. 11t - Low sprocket: Max. 36t/Min. 34t - Total Capacity: 40t

The GX Eagle Transmission derailleur is a lesser version of nothing. It delivers everything an Eagle Transmission derailleur possibly can, and then some. It features a revised battery position and a reconfigured gearbox to better protect itself from impacts. To maintain crisp shifting and striking appearance throughout its entire lifespan, hard-chargers can replace both its protective skid plates and two-piece outer link, if needed, making this the most repairable derailleur we’ve ever made. It also features the first ever tool-free cage and clutch assembly – so it’s both removable and upgradable too. With a steel inner cage that adds even more robustness, it’s been built for riders of the real world. Just like all Eagle Transmission derailleurs, it’s been engineered with a first-of-its-kind Hangerless Interface, mounting around the wheel axle itself and making direct contact with the cassette with no hanger required. The new transmission derailleurs feature the same intuitive pairing and set-up procedure as our Eagle AXS derailleurs. The revolutionary Full Mount attachment method creates a far stronger connection because it grips both sides of the frame. Let the record show that the GX Eagle Transmission derailleur plays second fiddle to nothing. It’s all in for all day. - Revised battery position, reconfigured gearbox, replaceable skid plates and outer link, tool-free cage and clutch - Install and pair via the reliable and familiar standard AXS set-up and pairing procedure - Hangerless Interface, Full Mount attachment method - Radically clear setup process, no adjustment required - AXS battery and Pod controller available separately

Riders want a derailleur that shifts on command, whether under climbing load or sprinting to the stage finish. The GX Eagle AXS derailleur gets it done with everything you have come to expect from our AXS connect components. The GX Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. Engineered with a variety of rider preferences in mind, it is compatible with our new expanded range 10-52t cassette as well as our 10-50t cassette. Showcasing its lineage from the proven GX Eagle mechanical line, the GX Eagle AXS derailleur is there for one thing: to do the job. Features - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - Overload Clutch protection - Finished with the GX Eagle master colorway - Battery sold separately Specifications - Speeds: 12 - Cage Material: Steel - Pulley Bearings Material: Steel - Max Tooth: 52

With the fast and accurate Di2 shifting technology, the Shimano 12-speed Ultegra RD-R8150 rear derailleur is extremely versatile thanks to a single cage length option compatible with 11-28, 11-30, and 11-34 cassettes. - Compact design includes an integrated wireless unit, charger, switch - Wider range capacity - Max. low sprocket 34t - LED status indicator - Battery indicator, pairing, adjust mode etc.

One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

Lighter, faster and more capable than ever, the Force AXS rear derailleur does it all in style. Covering cassette ranges from 10-28T up to 10-36T, this wireless wonder has a new, lighter cage and a larger pulley wheel to increase drivetrain efficiency. One derailleur ready for 2x or 1x, the steepest climbs and descents, all while shedding 12g from previous generation Force. Features - AXS enabled for easy setup, personalization, and reliability - Compatible with both 2x and 1x drivetrains - Compatible with cassettes from 10-28T to 10-36T - Larger X-SYNC pulleys for increased efficiency - Chain management technology keeps the drivetrain quiet and secure

Perfect shifting through better design, even through the toughest gravel terrain. By using a Full Mount interface, the Rival XPLR AXS rear derailleur ensures perfect shifting with no adjustment screws, and unmatched resilience to whatever the world throws at you. Mud, loose rocks, or careless airline employees can’t knock this out of adjustment. Wireless AXS shifting pairs with our smooth and strong chain management for an effortless, set-and-forget ride. Features - 1x specific for use with 10-46T XPLR 13-speed cassette and Flattop chains - Hangerless Interface and Full Mount attachment allow for the most precise shifting and the ultimate resistance to impact - Simple setup with no adjustment screws - Superior chain management with MTB-inspired spring clutch - Replaceable and rebuildable parts

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included

The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Added bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Compatible cassette size: 10-51 (12-speed), 10-45 (11-speed) - Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)

The brains of the operation. The Rival AXS rear derailleur is the choice for road riding, for all cassette sizes from 10-28T to 10-36T, for any terrain you cover. Precise wireless shifting with advanced chain management lets you ride with confidence anywhere. Features - Chain management technology keeps the drivetrain quiet and secure - AXS enabled for easy setup, personalization, and reliability - Compatible with both 1x and 2x drivetrains - Compatible with cassettes from 10-28T to 10-36T

Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well. - Updated cage geometry provides better chain retention and crisper shifting - Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options - Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience along with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX815 Di2 version offers the digital precision of Shimano electronic shifting with synchronization and is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Total capacity: 38T - Smooth and reliable mixed surface shifting - Compatible with current road Dual Control Lever - Maximum front difference: 17T - High cog: Max. 11T/Min. 11T - Low cog: Max. 34T/Min. 30T

From XC to enduro, SRAM's renowned X0 Type 2.1 Rear Derailleur is a rider's and racer's dream. Expertly crafted from carbon, titanium, and forged aluminum, the X0 is light enough to grace the fastest bikes out there. It's known for its precise, consistent function, efficient 1:1 exact actuation ratio and SRAM's Direct Route cable technology, all of which ensure that every single shift is crisp and lightning-fast. The roller bearing clutch keeps chain slap and derailleur bouncing at bay. Plus, with sealed bearings, this rear changer is built to last, too.

The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g

- Stable Shifting Performance - Pulley Follow-Up In Certain Distance - Shimano Shadow Rd Construction - Low Profile Rear Derailleur Design - Race Endurance For Less Damage In Crush - Adapted For Race Specific Frame Design - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T

Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes

The Eagle 90 Transmission derailleur is the definitive answer to how good a cable actuated derailleur can be. It features an all-new T-Type cable actuation ratio to provide the most precise and crisp shifts every time. Utilizing the same Full Mount design as its electronic siblings, Eagle 90 is the strongest mechanical derailleur we have ever produced. Not only is it robust, but the derailleur body features replaceable outer and inner parallelogram links, skid plates, and a tool-free threaded cage assembly, making it the most rebuildable derailleur in the Eagle Transmission Ecosystem. Features - Full Mount Design. - T-Type compatibility. - Silver/black colorway. - Most robust mechanical derailleur. - Replaceable skid plates, outer and inner parallelogram link, cage or cage assembly. - The most rebuildable derailleur in the Eagle Transmission Ecosystem.

It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. - Enduro focus and trail ready - Forged aluminum cage - Stainless hardware - Black/Polar colorways - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.

Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts

SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

The Eagle 70 Transmission derailleur is the bedrock of the best cable-actuated Transmission shift experience. It features an all-new T-Type cable actuation ratio to provide the most precise and crisp shifts every time. Utilizing the same Full Mount design as its electronic siblings, the Eagle 70 Transmission derailleur brings strength and dependability to any bike. The derailleur body features replaceable skid plates like GX, X0, and 90 and shares many of the same rebuildable qualities of those high-end derailleurs. Features - Robust Full Mount Design. - T-Type compatibility. - Replaceable skid plates, outer parallelogram link, cage or cage assembly. - New Drag Spring damper. - Black colorway.

Eagle range on a drop bar bike? Now that's a party. The Apex Eagle rear derailleur quietly and quickly shifts across our 12-speed Eagle cassettes, while 1x-specific chain retention technology keeps the chain where it needs to be. It's the best of our road and mountain bike innovations in one package. - Compatible with 50T and 52T Eagle cassettes - Works with 12-speed mechanical Apex and Eagle shifters - Use with Eagle chain - Roller Bearing Clutch controls chain tension for consistent shifting - X-HORIZON straight parallelogram design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - Cage Lock technology makes for fast wheel changes or chain installation

This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel

Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)

SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage

The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap. - X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings and aluminum cage - Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock - Medium cage: 11-26 through 11-36 cassettes, 269g - Long cage: 10-42 cassette, 275 g

• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible

Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.

We understand that the gnarly line requires a lot more focus than a lap of the supermarket. That's why we packed the GX DH 1x X-HORIZON rear derailleur with World Championship-winning features and gave it a price tag that speaks more to the Wednesday Night Championships. This is a DH derailleur that is easier to shift, is incredibly precise, and keeps the unwanted noise of chain slap to a minimum, so you can concentrate on the sweet feeling of nailing your line. GX DH—Get Some. - X-ACTUATION for precise and dependable 7-speed performance - Fully compatible with the SRAM X01 DH drivetrain - X-HORIZON design that reduces shift force, ghost shifting, and cage slap - 12-tooth X-SYNC pulley wheels

Incredibly fast, buttery smooth and impressively precise gear changes are here with SRAM's Force Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.

Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.

This new SX Eagle derailleur is your entry point to the SRAM Eagle Ecosystem. Sharing many features with the rest of the Eagle Ecosystem like the proven SRAM 1x-specific X-HORIZON body design, it can accommodate both 11-50T and 10-50T cassettes. The SX Eagle is cross compatible with much of the Eagle Ecosystem, making it easy to personalize and upgrade your ride when you are ready. - A full featured Eagle derailleur, compatible with the Eagle Colorsystem - X-SYNC pulley technology provides greater efficiency, crisper shifting, and quieter operation - Cage Lock offers discovery-level riders easy wheel removal - 50T max rear cog - Battery Not Included

The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. - X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - Fully compatible with all SRAM MTB 1x drivetrains - Most affordable fully featured 1x rear derailleur in the industry - Speeds: 11-speed - Weight: 322 grams - Color: Black - Compatibility: X-ACTUATION - Bearings: Steel - Cage Size: Long - Max Tooth: 42

SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation

SRAM's XX1 Ceramic Bearing Rear Derailleur Pulleys run on super-smooth, efficient ceramic bearings so your drivetrain rolls with ease. They are lighter than conventional pulleys and even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe.

SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.

Shimano's Ultegra Rear Derailleur delivers category-defining 11-speed shifting. At the heart of the derailleur is a light, tough, cold-forged-aluminum body with a wide, rigid pivot design that maximizes shifting speed and equalizes shift effort across the cassette. Smooth-spinning pulleys use sealed bearing to keep out the dirt and ensure quiet running in the miles to come.

- 1x11-speed SHIMANO SHADOW RD+ rear derailleur - MTB: Direct attachment (Shadow+) - 11T Min top Sprocket - 51T Max Low Sprocket - Stable drivetrain on the trail - Low-profile design avoids damage from rocks - Chain stabilizer reduces chain drop, slap and noise - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - Bigger 13T pulley

Incredibly fast, astonishingly quiet and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 191 grams. Plus, SRAM's WiFLi technology delivers a wider range of gears than your standard triple, faster shifts through two chainrings and every gear on the rear cassette, all with significant weight savings.

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

- Model Number: RD-R3000-SS - Series: SORA - Maximum Sprocket: 32T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 37T

SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again. - Lightweight aluminum construction - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems - Long cage for double or triple cranksets and 32T max cassette cog - Includes frame hanger attachment for use with older frame designs