Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$27.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$30.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$6.00
Flat head screws from Wheels Manufacturing.
$1.00
Chainring spacer kit with 14 different sizes for adjusting the chainline on inner and middle chainrings.
$20.00 - $25.00
These clamp sets can be used on any of the Thomson Seatpost line (Elite, Masterpiece, & Droppers)
$40.00
Like putting on a fine suit, adding Thomson's X4 Dress Up Kit to your Thomson X4 stem (sold separately) helps you look your best for any riding occasion and stand out from the crowd. This cool kit includes an anodized faceplate and top cap, 6 silver bolts and 6 black bolts so you can customize the look of your front end and add some class to your ride.
$15.00
Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.
$6.50
Surly bearing adjust caps for Mr. Whirly and OD
$35.00
The 12mm slotted MDS dropout is the newest chip for Surly's MDS equipped trail frames. You like chips, don't you? The 12mm slotted dropout chip uses a standard derailleur mount for maximum compatibility and is made of cast and machined 6061-T6 aluminum, with a fender eyelet. What's the coolest part about the 12mm slotted MDS chip, you ask? The fact that it also has the capability to run a 12 x 142mm thru-axle in a single speed configuration. This is good news because single speeds are good news.
When you get an MDS equipped frame you're getting the option to set it up however you want. You can run a 142 x 12mm thru-axle rear end with a direct mount Shimano hanger, standard 135mm QR or The Mighty Singlespeed. The way this will work is that Surly complete bikes that feature the MDS will ship with whatever chip is compatible with derailleur spec. For instance, the complete Instigator 2.0 ships with the 142 x 12mm thru-axle Shimano chip. If you want to change it to a singlespeed later (and why wouldn't you?), all you have to do is get the SS chip. Frames will ship with all three MDS chips so pick your poison. The 142 x 12mm and 135mm QR chips are made of cast and machined 6061-T6 aluminum and The Mighty Singlespeed chip is 304 stainless steel, because the two words 'aluminum' and 'singlespeed' should never be too close to each other. Bad things can happen…. As you can see, the MDS gives you not just different build options, it lets you use a more varied selection of parts for your frame up builds. The MDS is featured on most of our trail bikes. That's right: Krampus Ops, Karate Monkey Ops, Instigator 2.0 and Ice Cream Truck frames all sport these puppies.
$30.00
Like some of Surly's other chain tensioning devices, Snuggnut keeps your rear wheel from slipping forward in the dropout under the pedal load of your powerful gams. It's specifically designed for bikes that feature 12mm horizontal, vertical-slotted dropouts and is particularly suited for singlespeed application. Snuggnut is CNC-machined for durability and good looks, and shares many design features found on Tuggnut and Hurdy Gurdy.
Note: The Snuggnut is compatible with horizontal thru-axle dropouts only. If using 10/12 Adapter Washers and QR wheels use a Tuggnut instead. Snuggnut is not for use with MDS Chips.
Compatible models listed below:
- Wednesday
- ECR 29+
- ECR 27.5+
- Ogre
- Krampus
- Karate Monkey SS
- Karate Monkey 27.5
$15.00
Surly Stainless Steel Track Lockring.
- Fits all but Campagnolo, Miche or Phil Wood
- 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact
$3.00
- QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut
$8.00
• Forged aluminum seat clamp
• Chromoly integrated QR seat binder bolt
• Increased durability and clamping force
$8.00
• Quick-release seatpost clamp
• Aluminum lever and cap with a 6mm chromoly bolt
$2.00
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$7.00 - $10.00
- Binder bolt
- M6 x 45mm chromoly bolt
- 13mm CNC alloy nut
- Length: 45mm
$75.00
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with many SRAM BB30 road and SRAM BB30 mountain bike drive side cranks, as well as SRAM DUB MTB, Race Face Next SL and Specialized S-Works Road.
The Stages Power meter 30mm spindles are specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retro fit of the new carbon Stages Power Meter to a rider's SRAM and Race Face drivetrain.
Stages Cycling BB spindles are available in six options:
A) SRAM Red 22 BB30
B) SRAM Force 22, Rival 22, Force/Rival CX1
C) 2015MY SRAM BB30 mountain cranks - 9mm spacer*
D) 2015MY SRAM BB30 mountain cranks - 15.5mm spacer*
E) Race Face Next SL - 168mm q factor
F) Specialized S-Works Road - 2017/2018MY
G) SRAM DUB MTB
* Not compatible with 156mm Q-factor
$25.00
These simple rear pegs are the easiest solution for passenger footrests. XL 100mm length is large enough for passenger feet of all sizes.
**For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Haul ST and up to 2 pairs on Haul LT.
- 100mm long.
- Installation requires tools (not included).
*Not compatible with Rear Pannier adapters on the Haul ST due to shared mounting location.
$70.00
An essential part of any passenger-carrying system is something they can hold for balance. The Globe Passenger Handlebar bolts to the top of the Haul rear racks to provide passengers of all ages with a comfortable and safe grip. The reversible and versatile design can be mounted anywhere along the rack for a fully customizable setup.
**For Globe Haul ST: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Globe Haul ST and Haul LT.
- All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
$60.00
This soft foam pad provides a comfortable seating solution for passengers of all ages. Tool-free attachment to the upper rack platform preserves the rack side rails for mounting additional accessories, such as pannier adapters.
**For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Haul ST and Haul LT
- Reversible, asymmetric design allows for unlimited installation options.
- Hook-and-loop strap attachment for fast and secure installation.
- Up to 3 seats compatible with Haul LT.
$35.00
Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails.
- 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design
- New design clamp for better clamping and non-slipping of the saddle
$15.00
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp.
- 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes.
- 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.