Chat with us, powered by LiveChat Skip to main content

Book A Bike Fit Below!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$143.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
$4.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$40.00
Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm
$50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
$115.50
125 piece assortment of precision machined axle spacers (0.5mm to 5mm thickness). - Outside Diameter of Spacers: 16mm - Inside Diameter of Spacers: 10mm Kit includes: - (10) - 0.5mm thick spacers - (30) - 1mm thick spacers - (30) - 2mm thick spacers - (25) - 3mm thick spacers - (15) - 4mm thick spacers - (15) - 5mm thick spacers
$14.52
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
$2.00
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
$60.00
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
$65.00
- Deep section Road racing, Triathlon, Commuting, Touring, Track racing, and Singlespeed rim for strength and aerodynamics - Hollow core aluminum with machined sidewalls for improved braking
$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.
$180.00
Surly's Rolling Darryl Rim is a seriously wide single-walled rim. It's made to give wide tires an even wider footprint for better traction. Run low tire pressure and this 82mm wide rim will let you rock crawl over boulders and float through sand like you never thought possible. The material between the spokes is drilled out to reduce weight.
$8.00
- Replacement steel quick release skewers
$10.00
• Replacement aluminum quick release skewers
$10.00
• Replacement aluminum quick release skewers
$10.00
• Replacement aluminum quick release skewers
$10.00
- Replacement rear skewer - Spacing: 135mm - Material: Steel
$5.00
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$20.00
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
$24.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$370.00
The Flow's legendary history on the World Cup DH circuit, combined with Stan's WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer, more durable and more lightweight than previous versions, Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include pre-installed tape for tubeless use and Presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Tubeless ready with rim tape and valves installed - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats. - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for 2.35"-2.80" Trail and All-mountain tires
$20.00 - $22.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
$23.00 - $30.00
Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place
$15.00 - $18.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$210.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
$16.00 - $18.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$18.00
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair. Identifying your Hugo rim and selecting the correct valve stem: Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim. Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads: MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.
$66.00
Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
$360.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg
$440.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg
$440.00
Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process—where metal projectiles are shot at the alloy to increase its strength—meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel; held to the same standards as our highest-end Control SL carbon components. Whether you are looking for a solid set of training wheels that will handle it all or a big upgrade from entry-level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders. - Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts - Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width - Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs), 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm - Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Tire Size: 1.9" - 2.6" - Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi - Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg
Page 1 of 3 Next page