Chat with us, powered by LiveChat Skip to main content

Yeti Cycles SB150 T-Series T2

Yeti Cycles SB150 T-Series T2
  • Color: Turquoise
  • Color: Raw Carbon
  • Color: Moss
This item is currently not available.

Details

“RACE BRED” IT’S NOT JUST A SLOGAN PRINTED ON THE SB150 TOP TUBE. WE’VE BEEN PINNING ON NUMBERS AND PINNING THE THROTTLE SINCE 1985.

PROGRESSIVE RACE DRIVEN GEOMETRY
Designed for shorter fork offsets, the SB150's headtube angle is slackened and the seat tube angle is way steeper. The reach is also longer with shorter chainstays. Advantage? All of these elements increase the DH prowess and move the ride forward on the bike. But these advantages are not one-sided. The steeper seat angle, short fork offset, and forward riding position also keeps the front wheel on the ground, the power to the pedals that the steering quick and nimble when riding.

AN INFLECTION POINT FOR SPEED
We took Switch Infinity's winning heritage and made the leverage ration more progressive (but not too progressive) to provide greater compatibility with modern shocks and a wider range of racer setups. In addition, the bike has better small bump compliance, ramps up quicker in the mid-stroke, while still allowing for full travel and bottom-out control. Riders spend more time in the supportive part of the curve when entering toothy sections or carrying corner speed.

CUSTOM SHOCK TUNE
Each Yeti model has a custom shock tune that is developed in house. Each tune is specifically designed to work in conjunction with the leverage ratio and anti-squat performance properties the engineering team builds with each frame. The performance characteristics of the SB150 are built using qualitative data from our athletes, and quantitative data recorded from telemetry devices which allow us to derive a tune that both enhances mid-stroke and bottom-out control while maintaining its pedaling efficiency.

Specs

Frame TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Fork FOX FACTORY 38 GRIP 2/170MM
Rear Shock FOX FACTORY FLOAT X2 150MM
Tires FT:MAXXIS ASSEGAI 2.5 EXO+, RR:MAXXIS MINION DHR II 2.4 EXO+
Chain SRAM GX EAGLE
Rear Derailleur SRAM X01 EAGLE
Rear Cogs SRAM X01 EAGLE 1295 10-52
Shifters SRAM X01 EAGLE
Handlebars YETI CARBON 35X800MM
Tape/Grips ODI ELITE PRO
Brakes SRAM CODE RSC
Saddle SILVERADO CUSTOM
Seat Post FOX TRANSFER 31.6MM / SM: 125MM, MD: 150MM, LG/XL: 175MM

* Subject to change without notice.