Parts & Accessories
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series
USB cable for charging NiteRider® bike lights that utilize a micro USB charge port connection System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger
The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket
Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
Page 1 of 2 Next page