Filter By:
Accessories/Parts
$50.00
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location.
- ANGi is a ride tracker, crash detector, and safety beacon.
- Includes a one-year subscription to Specialized Ride Premium app.
- Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates.
- Additional premium features include start ride notifications and ride-time alerts.
- Attaches to Specialized ANGi-ready helmets.
- Approximate six months' battery life on a 2032 coin cell battery.
- Weight: 10 grams w/ battery
- Two-year sensor warranty

$35.00
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$34.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap.
COMPATIBILITY
- Cityzen KinetiCore
- Jackal KinetiCore
- Nutz KinetiCore
- Pnut KinetiCore
- Strada KinetiCore
- Vento KinetiCore
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2.5 hours
- RUN TIME: 54 hours
- LUMENS: 40 lumens
- ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet.
- WEIGHT: 15g

$34.99
Magnetic mount lens for Lazer Urbanize helmet
The integrated lens is an integral part of the Urbanize helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
COMPATIBILITY
- Urbanize NTA MIPS
- ATTACHMENT: magnetic
- WEIGHT: 54g
- MATERIAL: Polycarbonate

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$17.99 - $24.99
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 34g
- MATERIAL: Polycarbonate

$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Cameleon MIPS
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Gekko MIPS, Gekko, Lil'Gekko MIPS, Lil'Gekko
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS
- ATTACHMENT: Blade or Blade+ helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$17.99
A closed cap for the Bullet 2.0 in order to block airflow and maximize aerodynamics.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet vent
- WEIGHT: 21g
- MATERIAL: Polycarbonate

$17.99
Venturi technology accelerates the airflow through the helmet.
By creating an active air draw at the rear of the helmet, the Venturi cap increases airflow through the Lazer Bullet 2.0.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 21g
- MATERIAL: Polycarbonate

$17.99
Change ventilation options with a twist!
Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap.
COMPATIBILITY
- Century MIPS
- Century
- ATTACHMENT: magnetic
- WEIGHT: 28g
- MATERIAL: Nylon

$15.00
Mindset 360 fit system provides a secure, customizable fit with 360-degree tension adjustment, five height positions, and an integrated dial for easy, on-the-fly adjustments.
- Helmet not included, sold separately

$14.99
Visor for Coyote helmet
COMPATIBILITY
- Coyote MIPS
- Coyote
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System.
- COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS
- BATTERY TYPE: LR41 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: ATS dial
- WEIGHT: 15g
- MATERIAL: Nylon

$11.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
LED light for Lazer TSPLUS retention system
COMPATIBILITY
- Tonic MIPS
- Tonic
- Tardiz2
- Coyote MIPS
- Coyote
- Chiru MIPS
- Next+
- Compact DLX MIPS
- Compact DLX
- Compact
- BATTERY TYPE: CR2032 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: TS+ mechanism
- WEIGHT: 12g
- MATERIAL: LED light

$11.00
- Replacement Pads for Lazer's Blade, Magma, Elle, or Jade helmets
- X-Static pads are an anti-microbial, self-cleaning pad system

$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$10.00
Ponytail-ready HairPort SL II fit system with six height positions and micro-adjustable dial for optimized fit.
- Helmet not included, sold separately

$10.00
- Replacement fit system with hairport for all Specialized helmets using Headset SL
- Size Specific

$10.00
Replacement fit system assembly for Echelon, Echelon II, Propero II, Tactic, Tactic II with mushroom-plug snap attachment (verses the new 5-position adjustable attachment).

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Camera mount for Jackal and Impala helmets.
- COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala
- ATTACHMENT: Velcro
- WEIGHT: 13g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad.
- COMPATIBILITY: Cameleon MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads.
- COMPATIBILITY: Coyote MIPS, Coyote
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam
Page 1 of 2
Next page