Wheels

Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1" tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length (front): 700c Right/Left: 283mm/279mm - Spoke Length (rear): 700c Drive-Side/Non-Drive: 278mm/284mm - Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Weight (with rim tape and tubeless valves): 700c: 1357g

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Bearing Type: SiNC Ceramic Sealed cartridge - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g

The Reserve 28|XC is the race-ready culmination of everything we’ve learned from years at the highest levels of competition. At 1387g for a complete DT Swiss 180 hub wheelset with tape and valves (AND no rider weight limit and lifetime warranty), the 28|XC features a wider and lower rim profile than our previous XC race wheels, increasing strength and lateral rigidity while adding vertical compliance. The new rim shape also eases tubeless tire installation and improves tire bead retention at lower pressure. The Reserve 28|XC is sturdy and strong enough for a rowdy XC ride, but light and fast enough for a jaunt on the World Cup XC circuit. Spoke Reinforcements Reserve uses externally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight. Redesigned Rim Bed The 28|XC's redesigned rim bed eases tubeless installation, with a shaped rim bed utilizing offset spoke holes that allows the tire to easily push past the bead bump to seat tubeless tires. Asymmetrical Design Asymmetrical rims front and rear make for a stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes.

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Elevating Weekend Hot Laps to World Cup XC Status From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents – a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. - Rim: Control SL 29, 29mm Internal Width, Zero Bead Hook 4mm FlatTop Design, Tubeless Compatible, Compatible with Tire Inserts - Spoke Pattern: 28-Hole Two-cross (1:1) Non Driveside Front and 28-Hole Two-cross (1:1) Rear - Spoke Type: DT Competition Race Straighpull—Front Driveside 301mm, Non-Driveside 300mm , Rear Driveside 298mm, Non-Driveside 301mm - Nipple Type: DT Swiss Hexagonal Prolock Alloy - Hub: DT Swiss 350 Straight-pull, 6-bolt, 36t Star Ratchet System, 110x15mm & 148x12mm thru-axle compatible - Weight: Set—1450g w/ Tubeless Rim Tape - Assembly Method: Hand-built - Extras: 19 and 31mm OD end cap options included, Roval Spoke Kit, Tubeless Rim Tape and Valves, Lifetime warranty - System Weight Limit: 275lbs/125kg

The new standard in modern day, high performance XC and All Mountain wheelsets. With its hookless full carbon and tubeless ready rim, the XRC 1200 strikes a perfect balance between lightweight and aggressive riding-readiness. Its intricately machined hubshell is superlight while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel really sets the benchmark for going fast up and down, whether it's between the tape or not. - Tubeless ready wide and light carbon rim - 180 EXP hub with straight-pull DT spokes, 3-cross pattern - Factory installed tubeless-ready tape - Includes tubeless valve, 6-bolt rotor adapter, tools and wheel bag

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

When you head into trouble on the trail, be it up or down, the HX 1501 Spline One will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry leading rim alloy and profile design, the HX 1501 SPLINE ONE 30 isn't a one day wonder, but a trusty longterm partner. - 240s based Spline hub with 24 tooth ratchet system and steel Shimano freehub body - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

When you head into trouble on the trail, be it up or down, the HX 1501 Spline One will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength to weight, to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry leading rim alloy and profile design, the HX 1501 SPLINE ONE 30 isn't a one day wonder, but a trusty longterm partner. - 240s based Spline hub - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process—where metal projectiles are shot at the alloy to increase its strength—meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel; held to the same standards as our highest-end Control SL carbon components. Whether you are looking for a solid set of training wheels that will handle it all or a big upgrade from entry-level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders. - Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts - Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width - Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs), 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm - Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Tire Size: 1.9" - 2.6" - Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi - Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg

If cross country means high speed after work rides and the occasional endurance race to you, then have a closer look at the XR 1700 SPLINE wheel. The lightweight and welded aluminum rim, laced with competition spokes and reliable 350 hub, create a snappy accelerating wheel. - Welded Aluminum rim with 25mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Cross Country applications

Whether you are cutting through mud, dancing on icy, frozen trails or exploring dusty desert roads, you will feel the efficiency of these wheels. CR 1600's are ready to attack the challenges you put in front of them. - 350 based Spline hub with 18t ratchet system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

Versatility. A mountain bike is meant to go up and down mountains and to provide fun while doing so. The H1700 Spline do precisely that. And since e-bikes allow the rider to go up and down many mountains in one ride, reliability and weight is key. - 350 based Spline hub - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes tubeless tape and tubeless valve

The Flow's legendary history on the World Cup DH circuit, combined with Stan's WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer, more durable and more lightweight than previous versions, Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include pre-installed tape for tubeless use and Presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Tubeless ready with rim tape and valves installed - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats. - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for 2.35"-2.80" Trail and All-mountain tires

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Convert your R45D Gen. 2, and R45D Centerlock hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45D Gen. 2 and R45D Centerlock hub. - Stainless Steel Bearings - Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes. - Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910. - Compatible with all R45D Centerlock hubs. - Available with stainless steel or ceramic bearings. - 142x12mm axle. - Available in Silver or Black

Are you already planning your next bikepacking trip? The GR 1600 wheels are made for gravel adventures and all those unique experiences one can find far away from the tarmac and the rest of the road cycling community. A super durable aluminum wheel made of reliable components that supports you for endless miles of troublefree riding pleasure. Ready to explore the world? With the GR 1600 you definitely are. - 350 based hub

When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides. - Spline hub with 3-pawl system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

Replacement freehub kit for Hydra hubs

When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides. - Spline hub - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

Listen up all you seasoned all mountain riders out there, with your grazed calves and elbows! This wheel's for you. The lightweight M 1900 SPLINE 25 can withstand the toughest alpine trails. Its tubeless-ready rim has been tested by both professional mountain bikers on the trail and our experts in the lab. We've packed more than 20 years of expertise into the lightweight straight-pull hub to ensure that you'll be tearing up the trails for years to come with your M 1900 SPLINE wheels.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)