Derailleurs

SRAM's XX1 Ceramic Bearing Rear Derailleur Pulleys run on super-smooth, efficient ceramic bearings so your drivetrain rolls with ease. They are lighter than conventional pulleys and even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe.

Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system

The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range. - Advanced shifting performance provides the confidence to enjoy any trail - Fast and shockless shifting - Hyperglide+ - Extra wide range 12-speed drivetrain -10-51T (12-speed) - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - New bumper added to rear derailleur pulley cage - Bump Stopper - Bigger 13T pulley - Stable drivetrain on rough terrain - Low-profile design - Shimano Shadow RD+

Shimano's Ultegra Rear Derailleur delivers category-defining 11-speed shifting. At the heart of the derailleur is a light, tough, cold-forged-aluminum body with a wide, rigid pivot design that maximizes shifting speed and equalizes shift effort across the cassette. Smooth-spinning pulleys use sealed bearing to keep out the dirt and ensure quiet running in the miles to come.

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth, lightning-quick shifting even under load.

SRAM's Force 22 Front Derailleur gives you the freedom to shift with incredible speed into either chainring. Experience precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. Paired with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

The Shimano GRX RX-810-F front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. The RX-810-F also accommodates a 17T front chainring range for wider gearing options. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - 17T front range - More cable routing options - Lighter front shifting - Wider tire clearance - Wider range front gearing - Precise and easy front derailleur adjustment

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. This model is specifically optimized for 2x10 set ups. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time.

Shimano's SLX Front Derailleur is built tough for enduro/all-mountain use and it shifts quickly and smoothly every time. Shimano tweaked the angles for improved rear tire clearance and easier access to adjustment screws. This direct-mount attaches right your frame, so no clamp band is needed.

SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9

Shimano's groundbreaking 6800-series front derailleur delivers a shorter stroke at the lever and substantially lighter action for lightning fast shifts with just a flick of your finger. The redesigned pull arm offers more direct tactile feedback during shifts. The derailleur support bolt creates more solid contact to the frame, stiffening the derailleur and stabilizing it for faster, smoother shifts.

Shimano's 105 Braze-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

- Model Number: RD-R3000-SS - Series: SORA - Maximum Sprocket: 32T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 37T

SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

R10 front derailleurs work with 10-speed Shimano-compatible road shifters. Designed to work with a variety of chainring combinations, these workhorse components will get you rolling again. - Cold-forged aluminum body

Shimano's Deore 10-speed Front Derailleur sports a lightweight cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth, and reliable shifts every time. Dual-pull design simplifies setup by working with top or bottom routed shift cables.

- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g

The Shimano Altus RD-M310 rear derailleur is a quality, durable replacement rear derailleur for 7 and 8-speed drivetrains. - 13t upper and 15t lower pulleys - Maximum cog size: 34t - Total capacity: 43t

Shimano's Deore 10-Speed Front Derailleur sports a lightweight cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth, and reliable shifts every time. Dual-pull design simplifies setup by working with top or bottom routed shift cables.

The Shimano Tourney rear derailleur offers smooth shifting with SIS and HyperGlide technologies for 7-speed drivetrains. - Maximum cog size: 28t - Total capacity: 37t

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t