Brakes/Levers/Pads

Disc Brake Adapters

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Bring the power and performance of disc brakes to your drop bar bike. - Road-specific. - Mechanical simplicity.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal. - Mechanical simplicity - Adjustability

Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers. - Road-specific - Mechanical simplicity - Adjustability

A sleek and stylish upgrade to the best mechanical caliper on the market. The BB7S stainless steel hardware and anodized finish make it right at home on any road-disc build. Compatible with RED, Force, Rival and Apex levers. - Black anodized finish - Stainless steel hardware

- More durable and quiet resin compound than previous DB-210 pads - Anti-vibration elastomer behind pad further reduces noise - Magnetic spring in caliper & physical spring between pads for fast and consistent pad return - Visual wear indicator shows if your pads need to be replaced, without removing them - Chamfering at the bottom eases wheel insertion, for race-fast wheel changes - Loops at top of the pads act as cooling fins for improved heat dissipation

The Campagnolo Chorus Ergopower Brake/Shift system features improved ergonomics that can be tailored to the rider's individual preferences. - Ultra-Shift function allows for multiple shifts in one motion and greater control for racing - Aluminum braking lever features reach adjustment mechanism - Technopolymer Ergopower body Specifications: - Rotor Included: No - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

• Design with alloy carrier SIZES • 180mm and 160mm WEIGHT • 119 grams (180mm) • 98.2 grams (160mm) Note: Rotors not sold as sets

- K-Force rotors feature a two piece design balancing weight and braking performance. Weight relieved alloy carrier for added rotor stiffness - Afterburner rotors have an increased surface area for better heat management - Rotors include: (1) 6-bolt/44mmBCD rotor with (6) T-25 rotor mounting bolts - 98g K-Force, 142g Afterburner

- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt

- Ratcheting quick release lever - Lightweight, compact dual pivot design - Stainless steel main pivot bolts - Stainless steel cable attachment hardware - Adjustable spring tension - Stainless steel hardware - New brake pad compound SIZES - Reach - 40-50mm - Rim capacity - up to 28mm FINISH - Anodized black finish - Laser graphics WEIGHT - 365 grams (pair)

Shift/Brake Lever developed with K-Force WE technology—a high-tech electronic drivetrain with an elegant design. - Compact master cylinder - Minimal hood and housing design for optimum ergonomics - Top mount bleed port - Lever reach adjustment - Roller actuator lever design - Integrated reservoir - Composite lever blade - Delrin piston guide - Oversized lever pivot bushings - Stainless steel pivot pin - Master cylinder clamp - High-pressure three layer FSA hose - O-ring sealed hose connection - Custom compound pads - Flat mount caliper - 455.4 grams (pair)

- Pad sets include pads and retraction spring for one caliper

Shimano XTR/XT/SLX 2-Piston Compatible Disc Brake Pads

Hose fittings for Hayes hydraulic disc brakes

These adapter brackets are designed to work with the Post Mount style brake mounts.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors: Sintered T100 Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 (aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free. Includes 2 pads, retention screw.

Brake Pads for your Dominion T2 and an upgrade option for Dominion A2. Semi-metallic T106: Friction material provides enhanced modulation and silent operation. Aluminum backing plate for reduced weight.

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Hope Brake Lever Parts

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

Brass hose insert for Hope hydraulic disc brakes.

Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own FEATURES - Constructed in two parts, aluminium centre and stainless steel braking surface. - High performance disc, allowing the stainless steel outer to expand separately from the centre and handle high temperatures without warping. - Hope floating rotors have a true floating design which allows 1 degree of freedom. This means the outer is always free to expand when subjected to heat. - Lightweight design. - Aluminium centre acts as heat sink keeping disc temperatures lower. - CNC machined centre is stiff and lightweight so has the advantages of a thicker fixed disc without the weight penalty.

All our brake pads are designed and dyno tested in-house at Barnoldswick All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes Almost all our brake pads are available in sintered or standard compound options All our brake pads come with the necessary hardware

Hope Brake Line kits · Works for front or rear · Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes · Length is 1500mm

The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation. KEY FEATURES - Dot Fluid Calipers will have Bore Caps with a D etched. - Mineral Oil Caliper will have Bore Caps with an M etched. - Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount - Calipers designed to fit 140, 160 & 180mm rotors - Slimline 4 piston lightweight design - Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub - Available in Black, Silver, Bronze, Red, Blue, Purple and Orange - Top entry pad fitting - CNC machined from 2014 T6 aluminium ***Please note*** Shimano and SRAM brands belong to a third party and have no relation with Hope Technology RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems (Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo) Shimano Compatible Calipers (RX4+) Dura Ace Di2 R9270 / R9170 / R9120 / R9200 Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 / 105 Di2 R7170 / R7020 / Di2 R785 / RS685 / GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2 Campagnolo Compatible Calipers (RX4+) Ekar / Super Record / Record / Campagnolo H11 SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid) Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS / Sram Rival / Sram Apex / Sram S900

Our mountain rim brake pads are available both with a threaded or smooth post.

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Basics brake pads offer a durable, reliable replacement to get bikes back on the road. - All-weather compound - Compatible with caliper style brakes all-weather compound - 50mm long - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: One Piece - Rim Compatibility: Standard

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate - Compatible with SRAM Code RSC (A1), Code R (B1), Guide RE; Avid Code (2011-2016)