Tubes: All Sizes/Types

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact - Wheel Diameter: 29'' - Tube Width: 2.20-2.60 - Valve Length: 40mm - Valve: Presta - Tube Weight: 100g - Shaft Type: Threaded - Thorn resistant: No

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

This is Surly’s 29 x 3-inch Presta valve tube. It fits their Knard tires and is made of butyl rubber.

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because Specialized designed their Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, Specialized designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - 40mm Presta valve

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Presta Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

These are no ordinary bicycle tubes! These extra strong inner tubes stop flats for 2 years because there is Slime inside. - No more flats for 2 years! - Extra strong with Slime sealant inside - Instantly seals tread area punctures up to 1/8" (3mm) in size - Seals multiple punctures repeatedly - Non-toxic and non-flammable - Cleans up with water

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

These are no ordinary bicycle tubes! These extra strong inner tubes stop flats for 2 years because there is Slime inside. - No more flats for 2 years! - Extra strong with Slime sealant inside - Instantly seals tread area punctures up to 1/8" (3mm) in size - Seals multiple punctures repeatedly - Non-toxic and non-flammable - Cleans up with water

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 29 x 1.9 – 2.3 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 176g (32mm), 178g (48mm)

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Presta Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality - 32mm Presta valve

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Because it's hard to know when you're going to get a flat, it's always good to have extra tubes on hand. Specialized's Turbo Ultralight MTB Tube w/Talc is lightweight to save rotational weight. The Talc lets the tube move easier inside the tire for a better ride with fewer flats.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- Size: 26 x 1.0 – 1.25 - ISO Diameter: 559 / 26" mtn - ISO Width: 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 31mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 96g

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

The Teravail Standard Schrader and Presta Valve tubes feature our widest variety of tube sizes and valve lengths with a proven record of high quality control and consistent availability. - 0.9mm wall thickness - Removable Presta valve core - Teravail Standard packaging features environmentally friendly soy ink printing on recycled cardboard - Size: 700c x 30 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 30 – 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 140g

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

One tube to rule them all! Are you riding a mixed wheel size mullet bike? Can't decide to bring a 27.5" or 29" spare? Or do you just want to be a trail hero saving others with your versatile tube that fits both 27.5" and 29"? The new MTN MULLET tube takes the guess work out of which size tube you should pack. At the drop of a hat, this tube is ready to take care of business up front or ride the party in the back. - 40mm Presta Valve - For tire size: 27.5/29x2.3-2.6 58-66x584/622 - Tube weight: 220g

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

One tube to rule them all! Are you riding a mixed-wheel size mullet bike? Can’t decide to bring a 27.5” or 29” spare? Or do you just want to be a trail hero saving others with your versatile tube that fits both 27.5” and 29”? The new MTN MULLET tube takes the guesswork out of which size tube you should pack. At the drop of a hat, this tube is ready to take care of business up front or ride the party in the back. - For tire size: 27.5/29x2.3-2.6, 58-66x584/622 - 40mm Presta Valve - Tube weight: 220g